MTL5582B MTL Intrinsically Safe Isolator 5500 Series RTD-RTD Isolator, Ивано-Франковск

MTL5582B MTL Intrinsically Safe Isolator 5500 Series RTD-RTD Isolator

MTL 5500 Intrinsically Safe Isolators Resistance Isolator MTL5582B

MTL4582B - MTL5582B RESISTANCE ISOLATOR to repeat RTD signals
The MTLx582B connects to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous area, isolates it and repeats the resistance to a monitoring system in the safe area. The module is intended typically (but not exclusively) for use with Pt100 3-wire RTDs. Switches enable selection of 2-, 3-, or 4-wire RTD connection. The MTLx582B should be considered as an alternative, non-configurable MTLx575, for use in RTD applications where a resistance input is preferred or needed instead of 4/20mA. The design is notable for its ease of use and repeatability. The number of wires which can be connected on the safe-area side of the unit is independent of the number of wires which can be connected on the hazardous-area side. The module drives upscale in the case of open circuit detection.

Email: anna@cwlyautomation.com
Tel: +86 13667121125 whatsapp/ vk/ telegram also available
Company: CW Green Tech

MTL5582B product specification
SPECIFICATION
See also common specification
Number of channels
One
Location of RTD
Zone 0, IIC, T4 hazardous area
Div. 1, Group A, hazardous location
Resistance source
2-, 3-, or 4-wire* RTDs to BS 1904/DIN 43760 (100Ω at 0°C)
*user selectable by switches (factory set for 3-wire)
Resistance range
10Ω to 400Ω
RTD excitation current
200μA nominal
Output configuration
2, 3 or 4 wires (independent of mode selected for hazardous area terminals)
Output range
10Ω to 400Ω (from a 100μA to 5mA source)
Temperature drift
±10mΩ/°C typical (0.01%/°C @ 100Ω)

Email: anna@cwlyautomation.com
Tel: +86 13667121125 whatsapp/ vk/ telegram also available
Company: CW Green Tech

Response time
To within 4% of final value within 1s
Safety drive on open-circuit sensor
Upscale to 420Ω nominal
Transfer accuracy@20°C
<0.15Ω at excitation current 1 - 5mA
<0.25Ω at excitation current 0.5 - 1mA

LED indicator
Green: power indication
Power requirements, Vs
33mA at 24V
35mA at 20V
28mA at 35V
Maximum power dissipation within unit
0.8W at 24V
1.0W at 35V
Safety description
Terminals 1 and 3
Uo = 1.2V Io = 4mA Po = 1.2mW Um = 253V rms or dc
Non-energy-storing apparatus ≤ 1.5V, ≤ 0.1A, ≤ 25mW; can
be connected without further certification into any IS loop with
an open circuit voltage < 5V.
Terminals 1, 3, 4 and 5
Uo = 6.51V Io = 10mA Po = 17mW

Other related product models for MTL5500 range as below for your reference.
MTL5501-SR
MTL5510 / MTL5510B / MTL5511
MTL5513 / MTL5514
MTL5514D / MTL5516C
MTL5517
MTL5521
MTL5522
MTL5523 / MTL5523V
MTL5523VL
MTL5524
MTL5525
MTL5526
MTL5531
MTL5532
MTL5541
MTL5541A / MTL5541AS
MTL5544 / MTL5544S
MTL5544A / MTL5544AS
MTL5544 / MTL5544D / MTL5544S
MTL5546 / MTL5546Y / MTL5549
MTL5549Y / MTL5561 (//ukrgo.com.ua)
MTL5553
MTL5573
MTL5575
MTL5576
MTL5582
MTL5582B
MTL5523V, MTL5523VL, MTL5546Y and MTL5553.
MTL5501-SR
MTL5510 / MTL5510B
MTL5511 / MTL5513
MTL5514 / MTL5514D
MTL5516C / MTL5517
MTL5521
MTL5522
MTL5523 / MTL5523V
MTL5523VL
MTL5524
MTL5525
MTL5526
MTL5531
MTL5532
MTL5533
MTL5541 / MTL5541S
MTL5544 / MTL5544D
MTL5544S
MTL5541A / MTL5541AS
MTL5544A / MTL5544AS
MTL5546 / MTL5546Y
MTL5549 / MTL5549Y
MTL5561
MTL5553
MTL5573
MTL5575
MTL5576
MTL5581
MTL5582
MTL5582B

MTL5018AC
MTL5501-SR
MTL5510
MTL5510B
MTL5511
MTL5513
MTL5514
MTL5514D
MTL5516C
MTL5517
MTL5521
MTL5522
MTL5523
MTL5523V – V
MTL5524
MTL5525
MTL5526
MTL5541
MTL5541A
MTL5541AS
MTL5541S
MTL5544
MTL5544A
MTL5544AS
MTL5544D
MTL5544S
MTL5546
MTL5546Y
MTL5549
MTL5549Y
MTL5573
MTL5575
MTL5576-RTD
MTL5576-THC
MTL5581
MTL5582
MTL5582B
MTL5991
MTL5531
MTL5532
MTL5533
MTL5561
MPA5500
MTL5051
MTL5053
MTL5314
MTL5599